Tip Kit, for Use with 3KMN4 and 3KMN5

Tip Kit, for Use with 3KMN4 and 3KMN5 - EOL

Apollo ECO-3 Turbospray with A5011 SuperSpray Gun

Apollo ECO-3 Turbospray System with A5011 Superspray Gun

Apollo A5610 Conversion Gun with 1 Qt. Cup - EOL

Availability: In stock

Apollo A5610 Conversion Gun with 1 Qt. Cup

The Apollo A5600-series Conversion Gun generates equal power and flawless performance from either a compressor or a turbine.

Tired of fighting the cloud of paint mist overspray from your current spray equipment, but not ready to invest in a full fledged HVLP system? Fear not! The brilliantly engineered conversion chamber is built into the head of the gun to convert high-pressure air into HVLP air flow (High Volume Low Pressure).

This conversion gun is also compatable with HVLP turbine systems. Best of all, the conversion from compressor to turbine mode is as simple as changing the quick disconnect hoses. And unlike most conversion guns, this will run off compressors as small as 3hp with a 20 gallon tank!

With the conversion to HVLP, the amount of overspray is greatly reduced while a high-quality finish is achieved.


  • Aluminum cast housing to minimize weight
  • All wetted parts made of stainless steel
  • No 'O'-rings.
  • Bronze plated spray head and handle
  • Duckbill valve
  • Teflon-coated cup assembly
  • Minimum Compressor size is 3hp with a 20-gal tank.


  • A5610 Conversion spray gun
  • 1-quart teflon lined cup
  • 1.0 mm tim and needle installed
  • Wrench and Lube
  • Instruction Manual
  • 2-year warranty

Made in USA.

More Information