0item(s)

You have no items in your shopping cart.

$0.00
Shop Categories
Clearance

Product was successfully added to your shopping cart.
  • 7 in. White Gutter Screw and Ferrule Set for 5 in. Gutters 7 in. White Gutter Screw and Ferrule Set for 5 in. Gutters

7 in. White Gutter Screw and Ferrule Set for 5 in. Gutters - QTY:10

SKU: GS-5310

Be the first to review this product

Quick Overview

FastenMaster 7 in. White Gutter Screw and Ferrule Set for 5 in. Gutters - QTY:10
$20.99
7 in. White Gutter Screw and Ferrule Set for 5 in. Gutters - QTY:10 is available for purchase in increments of 1

Details

7 in. Gutter Screw and Ferrule Set for 5 in. Gutters

These tough screws may be used as replacements for gutter spikes, or for new installations.

SCREW FEATURES:

  • 5/16 x 7 in. galvanized gutter screw.
  • Painted head and shank
  • 1-1/2 in. thread length
  • 1/4 in. shank diameter

REPLACEMENT OF OLD GUTTER SPIKES:

  • Remove old gutter spike and ferrule
  • Position the new ferrule inside the gutter over the existing spike hole.
  • Using slow speed on driver drill, slowly drive new screw through the gutter and ferrule.
  • Continue driving the screw through the back of the gutter and into the fascia board.
  • Tighten until the gutter screw is snug being careful not to over-tighten.

INSTALLING NEW GUTTERS:

  • Position the ferrule inside the gutter where the screw will be installed.
  • Using the ferrule or wood block for support, tap the gutter screw into the outside edge of the gutter. (a punch may also be used for this step,)
  • Slowly drive the gutter screw through the gutter front, the ferrule, and the back of the gutter into the fascia board.
  • Tighten until the gutter screw is snug being careful not to over-tighten.

PACKAGE CONTENTS:

  • (10) 7 in. gutter screws.
  • (10) ferrules
  • (1) #3 Square Drive bit.

Made in the USA.

Additional Information

Product Group Screws & Fasteners
Category Specialty Purpose
Sub-Category Gutter Screws
SIZE (#8, #10 ...) 5/16 in.
LENGTH 7 in.
MATERIAL Aluminum
RECESS Square
HEAD Pan
BRAND FastenMaster
POINT TYPE Standard Wood
DRIVER BIT SIZE #3
QUANTITY SML (1-50)
COLOR White
CASE / BINS No
Unthreaded Screw Length 5-1/2 in.
Threaded Screw Length 1-1/2 in.
Head Diameter 1/2 in.
Unthreaded Shank Diameter 1/4 in.
SPECS: No
Prop 65 No
SKU GS-5310

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Documentation is unavailable