Free Shipping over $99
Details
Expansion Pin Anchor
Designed to attach to masonry or concrete. Great for light duty applications such as installing electrical boxes or shelving brackets.
FEATURES:
- Zinc plated steel pin
- Available in two diameters (3/16 or 1/4 in.)
- Typical Pull Out Strength in cured concrete = 400 lbs for the 3/16 in. pins and 800 lbs for the 1/4 in. pins.
INSTALLATION:
- Predrill hole the same diameter as the anchor with carbide tipped masonry drill bit.
- Hole must be 1/2 in. deeper than the achor's embedment
- Drive in pin with anchor installed firmly in concrete.
- Do not strike pin until anchor is completely seated.
TIP: a deep socket can be used to tap the anchor body into the concrete without striking the pin.
Age and condition of wall may affect performance.
Additional Information
| Product Group | Screws & Fasteners |
|---|---|
| Category | Anchors |
| Sub-Category | Anchors |
| THREAD SIZE | 1/4 in. |
| LENGTH | No |
| MATERIAL | Zinc, Plated |
| RECESS | No Recess |
| HEAD | No |
| BRAND NAME | McFeely's |
| Thread Type | No |
| POINT TYPE | No |
| DRIVER BIT SIZE | No |
| QUANTITY | 100-Box |
| COLOR | No |
| CASE / BINS | No |
| Head Diameter | No |
| Unthreaded Shank Diameter | No |
| Specifications | No |
| SKU | PMA-0414-C |
- Be the first to review this product
Documentation is unavailable
