Tenon & Grooving Jig - QTY:1 - 12P714

SKU: TR-2509

Be the first to review this product

$138.60
Tenon & Grooving Jig - QTY:1 - 12P714 is available for purchase in increments of 1
OR

Quick Overview

Tenon & Grooving Jig - QTY:1 - 12P714

Tenon & Grooving Jig - QTY:1 - 12P714

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Tenon & Grooving Jig - QTY:1 - 12P714
This adjustable jig allows you to use your router to cut grooves up to 2-3/4" depending on the diameter of the router base. The edge of the frame can be used as a guide to trim panel squarely or cross cut boards. It has two sliding stops to set the groove length. The squaring butt has the ability to accept a splech block to allow a full length groove. The fixing screws are included for this purpose. The working length of this jig is 15-3/4". Use a router with a guide bush with a minimum of 3/8" projection fitted. It requires the use of two clamps. The jig includes extrusions, corner brackets, scales, squaring butt, length stops and hex key. Imported
PRODUCT GROUP Clamps, Jigs, & Fences
CATEGORY Jigs
SUB-CATEGORY Specialty Jigs & Router Guides
BRAND NAME Trend
CLAMP JIG BRAND d No
JIG TYPE No
SKU TR-2509

Use spaces to separate tags. Use single quotes (') for phrases.


Write Your Own Review

You're reviewing: Tenon & Grooving Jig - QTY:1 - 12P714