Festool ® Cristal Abrasives
The New Material Removal Specialist
Sometimes your work involves just one thing: Material removal. All in a day’s
work when you’ve got the new high-performance Festool Cristal abrasive at your
side. The perfect solution for any situation requiring quick, aggressive sanding
where a smooth surface finish is not imperative. Minimal disc consumption and
simple pad changes are a matter of course. Find Cristal abrasives for
your Festool sander. You may also want to read our tech section which
contains information about the entire line of Festool abrasives.
Maximum material removal.*
Increase your material removal rate by up to 40%* when coarse sanding
with Cristal and benefit from maximum resistance to clogging. What makes
Cristal so efficient? The sparse grit coating. |
Minimal clogging.
With the Jetstream principle, your sanding discs can be used more
intensively and for longer: additional air ducts in the sanding pad
prevent a vacuum from forming. This keeps the temperature low during
sanding and also minimises clogging. |
Extended usable life.
The aluminium oxide grits retain their geometric shape, even when
sanding the toughest materials and ensure maximum removal capacity and
minimal wear. |
Reliable working result.
You achieve an even finish whichever grit size you use because the
coating is adapted to the respective grit range. |
Extremely durable.
The special phenolic resin bonding is both resistant and flexible. The
grits adhere to the support material for much longer as a result. |
Quicker changes.
It could not be easier: the Festool StickFix Velcro system secures the
sanding disc to the sanding pad and ensures that the contact surface is
always flat. Simply remove and attach the next abrasive! |
| Use/Materials: Paints/ Varnishes, Wood Preliminary, Drywall Compound Auto Body Filler, Preliminary coarse sanding Aggressive Sanding
Specs: AlOx with open coat to resist clogging (OK for sanding waterborne finishes); Phenolic resin bond on tear resistant paper.
Availability: Grits 40 to 120 |
Applications Coarse sanding on:
- Old lacquer and paint
- Plasterboard and dry wall filler
- Vehicle body repair compound
- Soft sublayers
- Water-based acrylic or oil paint
- Undercoat
- Filler
- Protective Paint
- Primer
- Polyester resin, epoxy resin and PUR varnishes
- Plaster, dry construction filler
- Softwood, hardwood, chipboard and other board
|
|