Snappy 1/8 in. Dia. Std. Point x 1/4 in. Trim Head Countersink - QTY:1 - 3VXV2

SKU: MS-7010

Be the first to review this product

$11.40
Snappy 1/8 in. Dia. Std. Point x 1/4 in. Trim Head Countersink - QTY:1 - 3VXV2 is available for purchase in increments of 1
OR

Quick Overview

Snappy 1/8 in. Dia. Std. Point x 1/4 in. Trim Head Countersink

Snappy 1/8 in. Dia. Std. Point x 1/4 in. Trim Head Countersink - QTY:1 - 3VXV2

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Snappy 1/8 in. Dia. Std. Point x 1/4 in. Trim Head Countersink - QTY:1 - 3VXV2

Snappy 1/8 in. Dia. Std. Point x 1/4 in. Trim Head Countersink

Finally, A Countersink Designed for Trim Head Screws

Trim head screws are great for installing trim moldings in softwoods, but generally require pre-drilling in hardwoods to avoid splitting, or worse yet, stripping of the recess. Standard countersinks either have too large a countersink or too small a pilot bit. The result is an oversized head hole that requires excessive filling, or a pilot hole that isn't big enough to clear the screw threads.

Our trim-head countersink drills a 1/8" clearance hole and has a 1/4" diameter countersink that fits most trim head screws perfectly.

You will need to eye-ball the depth. On countersinks this small, the use of a stop collar prevents wood chips from clearing, leading to heat build up, which can prematurely dull the edge on the countersink.

Made in USA.

DRILL BIT TYPE Countersink
PLUG OUTSIDE DIAMETER 1/4"
DRILL DIAMETER 1/8"
BRAND NAME N/A
BRAND - Bits, Blades, Abrasives Make It Snappy
COUNTERSINK TYPE Trim-Head
POINT TYPE Standard
SUITABLE FOR Wood Only
SHANK TYPE HEX, ball detent
SHANK DIAMETER HEX Shank - Ball Detent
QUANTITY (1) Each
SKU MS-7010

Use spaces to separate tags. Use single quotes (') for phrases.


Write Your Own Review

You're reviewing: Snappy 1/8 in. Dia. Std. Point x 1/4 in. Trim Head Countersink - QTY:1 - 3VXV2