Track saws can give you the same straight cuts as a panel saw with the added versatility of a portable saw! Use your track saw for straight, splinter free cuts in melamine, veneered plywoods, even high-pressure laminates. McFeely’s is proud to offer the leading track saws in the industry from Festool and Dewalt. Read more about awesome features of these track saws below. |
Festool TS 55 EQ Plunge Saw with T-Loc Systainer
561432
• Power Consumption: 1,200 Watts
• Saw Blade Speed: 2,000 - 5,000 RPM
• Saw Blade Diameter: 6-1/4" (160 mm)
• Bevel Cuts: Up to 45 Degrees
• Cutting Depth on Guide Rail:
1-15/16" (50 mm) Straight Down
1-7/16" (37 mm) at 45 Degrees
• Cutting Depth Without Guide Rail: 2-1/8" (55 mm) Straight Down
• Arbor Size: .787" (20 mm)
• Weight: 9.92 lb |
Festool TS 75 EQ Plunge Saw with T-Loc Systainer
561438
• Power Consumption: 1,600 Watts
• Saw Blade Speed: 1,350 - 3,550 RPM
• Saw Blade Diameter: 8-1/4" (210 mm)
• Bevel Cuts: Up to 45 Degrees
• Cutting Depth on Guide Rail: 2-3/4" (70 mm) Straight Down
2-1/8" (55 mm) at 45 Degrees
• Cutting Depth Without Guide Rail: 2-15/16" (75 mm) Straight Down
• Arbor Size: 1.101" (30 mm)
• Weight: 13.6 lb |
DeWALT
Track Saw
DW-DWS520K
• Power: 12 Amp, 1,300 W
• No Load Speed: 1,750 - 4,000 rpm
• Blade Diameter: 6-1/2" (165 mm)
• Bevel Capacity: 47°
• Max Cut at 90°: 2-1/8" (54 mm)
• Max Cut at 45°: 1-5/8" (41 mm)
• Weight: 11.5 lb
• The zero clearance cutting system delivers precise, straight, splinter-free cuts
• Dual-edged tracks for perfectly straight custs in both directions
• The motor effortlessy powers through hard woods up to 2-1/8" thick
• A low profile blade guard allows to be used in confined spaces
• Fitted with a 1-1/4" dust port
• The zero clearance cutting system delivers precise, straight, splinter-free cuts.
• Dual-edged tracks for perfectly straight custs in both directions.
• The motor effortlessy powers through hard woods up to 2-1/8" thick.
• A low profile blade guard allows to be used in confined spaces.
• Fitted with a 1-1/4" dust port.
|