PocketMax™ NoCoRode “Plus” Pocket Hole Screws
Designed for Use with 1-1/2” Thick Lumber!
Pocket hole joinery is versatile, easy, and fast, but you must have the correct screw for the job to realize its full potential. We designed the PocketMax™ pocket hole screw specifically for heavy-duty construction using 2x framing and pressure-treated lumber. It has an oversized head to deal with softwood effectively, the innovative ProMax Optimized Thread LengthTM shank to prevent crossthreading at the joint, and a self-drilling point to make installation easy. Use NoCoRode Undersized driver bits for best results. Made in Taiwan / China. Unthreaded Length 1-3/8"
Pocket Hole Joinery: What You Need to
Pocket hole joinery is popular because it is a fast, strong, easily adaptable, precise method of assembly. Joints are as strong as mortise & tenon joints and can be made in a fraction of the time. Award-Winning Kreg Jigs use a 3/8” counterbore bit with an 11/64” pilot to drill a 15° angle into the first piece.With the joint tightly clamped, a special self-drilling “pocket hole” screw is placed in the pocket and driven tight to complete the joint.
Pocket Hole screws feature an auger point to prevent raising a chip between the two parts during assembly, ensuring a tight joint. A large pan head with a #2 Square Recess and extended unthreaded shank enable this screw to draw the two members of the joint tight.
||Use Screw Length
|7/8” to 1-1/8”
|1-1/4” to 1-3/8”
||“Hard” woods: Cherry, Maple, Oak, Walnut
||“Soft” woods: Pine,Fir, Poplar, Cedar; Manmades: MDF, OSB, Particle Board