Trapease II Screws - Gray
The TrapEase II screws are approved for use in composite decking as well as ACQ and CA-B pressure treated wood. The zinc plated TrapEase II screws are guaranteed not to rust or streak in these materials when installed correctly. Screws should be driven slightly lower than flush with the deck surface. The dual thread draws the composite material back into the screw hole resulting itn a smooth finish. The heads of the screws are #10 trim and require the use of a #1 Square Drive bit. Point is a gimlet point with a cutting notch. Not for use within 1,000 feet of salt water or on decks where de-icing salt will contact the deck. Available in 100 sq. ft. (350 screws) and 500 sq. ft. (1,750 screws) decking packages. One driver bit is included with each package. Made in Taiwan and coated in the USA.
Instructions: Select the quantity of boxes
desired for each screw listed. To order a single box containing 100
screws you would select 1 from the drop down list below the "Box of
100". Once you have made all of your selections, click any of the Add to Cart
buttons to add the items to your shopping cart.