Back to Normal View
Woodpeckers® Saw Gauge
The perfect cut can’t be made with your Miter Saw or
Table Saw unless the blade is in perfect alignment. The
Woodpecker Saw Gauge is the first alignment tool that
automatically adjusts the width of the miter slot using
three steel pins. It works on slots from 5/8" to 7/8".
Drop the pin in the slot, set the saw gauge in place into
which ever groove that allows for sufficient travel of the
plunger. The dial indicator plunger has 0 – 1" travel.
Unlock the bezel knob and rotate to align the pointer to
zero on the dial. Watch the needle. As the gauge travels
along the miter slot, the gauge should stay at or near
zero if your blade is set correctly. The dial indicator is
(based on 2 reviews)
Reviewed by 2 customers
Displaying reviews 1-2
Back to top
Quality and simplicity
from Chattanooga, TN
About Me Avid Do-It-Yourselfer
See all my reviews
Comments about Woodpeckers Saw Gauge:
I use this to check the alignment on my contractor saw. I have been getting a lot of burnout on some hardwood pieces. Now I just have to take the time to realign a few parts and they should be good. with the addition of a shop jig. I should be able to check my blades the squareness of my blade much quicker.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(0 of 2 customers found this review helpful)
no quality control on this tool
from rochester mn
the two pins provided were different lengths and one was not chamfered.poor quality control. will send back and hope for the best.