Squeak-Relief 2 Bracket Repair-Pak

• pre-drilling not required or recommended
• can be installed to most subfloors (plywood, particleboard, slatboard) w/minimum 5/8" thickness
• use under carpet, tile, vinyl, wood flooring, and masonry products

Lots of things can cause a squeaky floor, but there is really only one cure. Floors squeak when one piece of flooring rubs against either another piece of flooring, or a flooring nail. The solution is to lock the offending piece of flooring into a position where it can’t move anymore. Squeak-Relief does this from the underside of the floor. A small aluminum bracket is screwed to the floor joist, then a second screw pulls the subfloor down tight. The whole process takes about 60 seconds! Each kit includes the required Phillips drive screws (1-1/4" and 3") and two Squeak-Relief brackets - enough for two repairs. Only one bracket per squeak needed.