Proxxon Micro Planer

Flat, straight boards every time

In order to have a project go together correctly, you’ve got to start with wood that is straight and true. The Micro Planer works on hard wood or soft wood. The triple spindled table is milled to close tolerances and can be adjusted to 0.1” (0.008”) with the top wheel on the top of the machine. The cutter shaft has two reversible long life cutters made from high speed steel. Replacing the cutters is made easier with a large opening service flap. Once you push the wood into the feed slot, a spring loaded roller grips the wood and automatically feeds it the rest of the way. Even irregular shaped wood pieces can be planed. On the way out, the wood is protected by a rubber coated roller. The on/off switch is protected from the dust and has a circuit protector that prevents the unit from turning on automatically after the power supply has been interrupted. Made in Luxemburg.

Proxxon Micro Planer Specifications:

• Volts: 110 -120 V AC, 60 Hz, Double Insulated
• Motor: 0.2 hp (150 W)
• Feed speed: 6,000 rpm 4.8 m/min
• Max. pass-through height: 40 mm (1-37/64")
• Max. pass-through width: 80 mm (3-9/64")
• Length of planing table: 232 mm (9-1/8")
• Planing cutter length: 82 mm (3-7/32")
• Chip decrease: up to 0.8 mm (1/32")
• Overall size: (11 x 9 x 9 1/8") 280 x 230 x 235 mm
• Weight: approx. 8.0 kg (17.6 lb)

View 'Proxxon Micro Planer' in our 2013 Master Catalog (M3D1), page 91