Tired of countersinks that slip on the drill bit after one or two holes? After tightening the set screw half a dozen times, the drill bit is usually so scarred up that there is no hope of any further adjustment. Make it Snappy countersinks are designed so that the countersink locks onto the hex shank, and the drill bit slides through the center. A set screw allows adjustment of the drill bit for different screw lengths. Because the drill drives the hex shank of the countersink, instead of the drill bit itself, slippage is eliminated! The bit may be replaced with equal sized bits of any point design or length.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
Good for the money
from South Bend, IN
About Me Casual Do-It-Yourselfer
Comments about Snappy 5/64'' x 3/8'' Countersink w/Standard Pt. Bit:
Easy to set depth of countersink with the collar and easy to set the pilot hole depth. Drill and countersink both stay where you set them. In my set the countersink dulled pretty quickly in Baltic birch plywood, requiring considerable pressure to countersink. That led to a number of broken 5/64 drill bits.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review