Read our Privacy Policy.

» Power Tool Accessories » Drivers & Bits » Bit Holders

FastCap TaperLock Bit Holder 2-7/8" Long

FSC-9007

Item No: FSC-9007
 
 

Product Information

No more “frozen” bit holders or screws stuck to screw heads!

  • Accepts wire detent and ball detent bits
  • Insert and release bits one-handed!
  • Magnet inside to help hold certain screws

Made from durable chrome vanadium, Fastcap’s TaperLock Bit Holder accepts both wire detent and ball detent bits and holds them snugly in place until you release them. It also prevents bits from being frozen in the recess because the bit holder’s hold wasn’t strong enough. A simple one hand operation allows you to insert the bit in the holder while the collar locks it in place. To remove, just slide the collar away from the drill and pull the insert bit out. No more accidental release by driving too deep and bottoming out the bit holder on the work surface. Made in Taiwan.

Product
Reviews

REVIEW SNAPSHOT®

by PowerReviews
FastCap TaperLock Bit Holder 2-7/8'' Long
 
3.0

(based on 6 reviews)

50%

of respondents would recommend this to a friend.

Pros

  • Easy to use (3)

Cons

    Best Uses

    • In the field (4)
    • Home repair (3)
    • In the workshop (3)
      • Reviewer Profile:
      • Professional (5)

    REVIEWS

    Reviewed by 6 customers

    Sort by

    Displaying reviews 1-5

    Back to top

    Previous | Next »

     
    5.0

    Works great so far !!!

    By Ten Penney

    from Connecticut

    About Me Professional

    Verified Buyer

    Pros

    • Easy To Use
    • Good Grip

    Cons

      Best Uses

      • Gifts
      • Home Repair
      • In The Field
      • In The Workshop

      Comments about FastCap TaperLock Bit Holder 2-7/8'' Long:

      so far it holds the bits and stops them from staying with the screw. there's nothing more troublesome than constantly replacing your bit back in the holder. great job FastCap

       
      1.0

      Don't Buy It!

      By Steven K.

      from Oregon

      About Me Avid Do-It-Yourselfer

      Verified Reviewer

      Pros

        Cons

        • Hard To Use
        • Poor Magnet

        Best Uses

        • Fishing Weight

        Comments about FastCap TaperLock Bit Holder 2-7/8'' Long:

        Great design but the magnet is horrible. The magnet will not hold a screw in place, which makes this accessory too frustrating to use.

         
        5.0

        solves problems encountered with others

        By dan,the tool guy

        from fond du lac,wi

        About Me Professional

        See all my reviews

        Verified Buyer

        Pros

        • Easy To Store
        • Easy To Use
        • Good Grip
        • Powerful

        Cons

          Best Uses

          • Home Repair
          • In The Field
          • In The Workshop

          Comments about FastCap TaperLock Bit Holder 2-7/8'' Long:

          great to have a holder that secures both bit types,little bit of wobble,but this a driver not a drill

           
          1.0

          Beauty Is Only Skin Deep

          By "Buddy"

          from Ely, NV

          About Me Professional

          Verified Buyer

          Pros

          • Good small paper weight

          Cons

            Best Uses

            • See Headline

            Comments about FastCap TaperLock Bit Holder 2-7/8'' Long:

            Several years ago I bought two bit holders from McFeely's that were the best I've ever found. I quickly lost one and have been trying every since to find more of the same with no success. These seemed to be the closest I had found. At ten and change the price wasn't bad had they worked, which they didn't. A bit holder that won't hold screws is of no use to me. That little magnet is like a third hand to me. [...] I ended up with four of the little buggers. To my surprise NONE of them would hold a screw. [...] The feature of ejecting the bit is great and if they can come up with a fix on the magnet I'll be reordering a couple more of them. If you just want a plain bit holder, buy the dollar idem at your local hardware store. If you want one that will also hold the screw, look elsewhere.

             
            1.0

            I don't like it, bad product

            By Electrician

            from San Jose

            About Me Professional

            Verified Buyer

            Pros

              Cons

              • Hard To Use
              • Underpowered

              Best Uses

              • In The Field

              Comments about FastCap TaperLock Bit Holder 2-7/8'' Long:

              The Magnet doesn't work,the screws fall from the bit, the lock is to sensitive and drop the bit.

              Displaying reviews 1-5

              Back to top

              Previous | Next »

              Tech Links
              & Resources