Back to Normal View
Cut and catch!
When the End Nippers are not enough, pull out the heavy-duty Flush Cut Pliers to cut things like nails. And you can trust that you aren’t leaving scraps around because these pliers come with two removable magnets to trap the cut off nail head. The head of the pliers is flat and angled so you can cut flush or pry up. The handle is covered with textured material for a sure grip. Pliers are 8” in length. Made in China.
(based on 4 reviews)
of respondents would recommend this to a friend.
Reviewed by 4 customers
Displaying reviews 1-4
Back to top
(1 of 1 customers found this review helpful)
Not tempered or hardened
By Old Timber
from Tabernash, CO
About Me Avid Do-It-Yourselfer
Comments about Heavy Duty FastCap Flush Cut Pliers:
The protruding thin brads I cut left hemispherical indentations in each blade. Clearly the blades are not well hardened and will not last long before becoming totally dull.
Bottom Line No, I would not recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Excellent HD flush cutters
from Concord, CA
About Me Professional
Pleasantly surprised with the general quality of these cutters, I put hem to work right away cutting some hardware cloth that I use to build crab snare cages, and they work great! My only complain it's that the rubber handles tend to slip out, but I secure them with some epoxy.I wish they'll have some sort of "spring" to keep them in the open position, that will greatly help me with the 100's of cuts I need to do.The magnets are amazingly strong, I ended removing them, but I like that I can use them or not, it's my choice I appreciate that.Even my wife likes them!
Bottom Line Yes, I would recommend this to a friend
Best nail cutters I've owned
from Chattanooga, TN
See all my reviews
After using side cutters designed for electrical chores for years, this tool demonstrates the importance of task-specific design. These are true flush cutters! The head is angled to allow finger clearance between the handle and workpiece, so you can develop full grip strength. Unlike traditional dikes (diagonal cutters), these cutting edges are ground on a single bevel, bringing the cut right down on the face of the workpiece. The powerful magnets catch the waste piece for you - especially important when working on a finished building where stray nails have to be cleaned up.
Excellent flush cut pliers
from Tulsa, OK
Easy to use - recommend highly