Pre-made Ipe Plugs simplify starter board installation when using Eb-Ty fasteners. These 3/8" dia by 7/16" long flat grain plugs are gently tapered, so they slip right into countersunk hole. The wood plug diameter is 0.353" and tapers up to 0.395". Glue them in, then pare them down with a nice sharp chisel. Made in USA.
(based on 2 reviews)
Reviewed by 2 customers
Displaying reviews 1-2
Back to top
IPE Plugs, A Really Handy Product
from Northern California
About Me Professional
Comments about IPE Plugs:
I've used literally hundreds of these plugs; on decks, gazebo construction, etc. Just use a 3/8" diameter Forstner bit to counterbore. After screwing in the screw dip the plug end in wood glue and pound in while aligning the face grain. After the glue sets, a sharp 1/2" chisel cleanly levels the plug to the wood sirface.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Don't expect perfection
By Lumberyard Mike
from North Carolina
About Me Avid Do-It-Yourselfer
Good matching color, some broken and all not quite tapered enough for my liking.