Building decks of man-made materials like
Trex® or tropical hardwoods like Pau Lope® or
Ipe? Use award-winning Eb-Ty hidden deck fasteners to hold down deck
boards and you’ll see nary a screw or nail. Our
Eb-Ty fasteners now include stainless steel screws
with black painted heads, so the deck fastener is
almost perfectly hidden!
Installation is easy – everything takes place
on the top side. First, use a biscuit joiner to cut
slots in each deck board where it crosses a joist.
Then apply a thin bead of construction adhesive
to the top of the joists. Next, drive a 7 x 2-1/4"
long stainless steel trim head screw through the
Eb-Ty clip and decking board and into the joist at
a 45° angle (there isn’t any need to measure; the
clips automatically set the angle). Eb-Ty’s unique
design locks everything together like the tongue and groove of a hardwood floor.
The Live Cylinder Jr. fastener has a lower profile height than the Eb-Ty Live Cylinder and is used for 11/16" and 3/4" decking material. The Live Cylinder Jr. provides the same expansion-absorbing capability as does the Eb-Ty Live Cylinder. It can absorb as much as 5/32" expansion of the deck material.
• Height: 13/32"
• Width: 1"
• Length: 2-3/8"
• Thickness: .140
• Keel Thickness: 1/4"
Eb-Ty received the 1998 Construction Innovation Award from the editors of The
Journal of Light Construction, has been reviewed in Fine Homebuilding (March
1998) and has appeared on The Learning Channel show, “Men in Tool Belts.”
Made in
the USA of UV-resistant polypropylene.