Back to Normal View
Now you can put a great looking, high gloss Polyurethane finish on your floors and still use an environmentally friendly waterborne product! It has all the basic properties of the other great Crystalac’s new Poly-OX is designed specifically for tough applications like bar tops, residential or gymnasium floors, or even
as a substitute for interior spar varnish, and it is an evironmentally friendly waterborne finish! The secret is the micro-fine Aluminum Oxide particles CrytaLac added to their polyurethane and acrylic resins to increase durability without significantly affecting clarity. This finish is very scuff resistant, and resists attack from harsh chemicals like alcohol or household cleaners. Brush it on right out of the can with a synthetic brush or lambswool applicator, or spray right out of the can with HVLP systems. Choose
from 3 degrees of gloss (numbers in parenthesis indicate degree of sheen)- its water clear, non-yellowing, UV stabilized great looks will keep the compliments coming. Do not use over other finishes unless they are thoroughly dry before application. Covers pproximately
500 square feet per gallon.
Available in Satin, Gloss and Semi-gloss in Quarts and Gallons. Satin Quart is pictured
(based on 3 reviews)
of respondents would recommend this to a friend.
Reviewed by 3 customers
Displaying reviews 1-3
Back to top
This product WORKS AS ADVERTISED !
from Austin, TX
About Me Avid Do-It-Yourselfer
Comments about Gloss Poly-Ox Polyurethane:
It takes 5 to 10 coats to seal softer wood, ie poplar. It works great on oak (3 to 5 coats as advertised).
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Great product for old floors!
By home renovator
from Newport, R.I.
About Me Casual Do-It-Yourselfer
I used them on 100+year old floors and although not looking new are highly respectible.
from Winter Haven Fl.
I put this on cherry table that I made.I sprayed 6 thin coats on it and it looks grate.