Back to Normal View
Imagine a super hard waterborne finish, formulated for spraying - right out of the can! No more catalysts to mix, no more wondering if you got the formula right. Just stir and shoot. If that isn’t enough, imagine that the finish is water-white-clear. If that sounds too good to be true, you haven’t tried CrystaLac Premium 2001 yet. Specifically designed for musical instrument builders who need a super hard, crystal clear finish (even clearer than our standard Premium 2000 topcoats). Use of a separate sanding sealer is not recommended - Premium 2001 is self sealing. Use it for your most demanding surfaces - desk tops, pianos, dining room tables - its up to the challenge.
Available in Satin, Gloss and Semi-gloss in Quarts and Gallons. Gloss Gallon is pictured
Note: Product is not recommended for brushing.
(based on 14 reviews)
of respondents would recommend this to a friend.
Reviewed by 14 customers
Displaying reviews 1-5
Back to top
Previous | Next »
About Me Avid Do-It-Yourselfer
Comments about Gloss 2001 CrystaLac:
Repainted Cabinets and used Gloss Crystalac as a finish coat. Excellent HVLP spraying properties right out of the can. Very hard finish and easy to clean up. Gloss had more of a semi-gloss finish though, even after 3 coats.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Best Waterborne Finish
from San Jose, CA
I used this product over 10 years ago on an oak coffee table and the finish is still good today. I also sprayed a large entertainment center I made for a friend several years ago and she has not had any problems with the finish. I've tried several different waterborne finishes from different manufactures and have not found anything that compares with Crystal-Lac.
I wouldn't use any other finish!
from Franklinton, NC
I use CrystaLac finishes from McFeely's for all my furniture projects and have for years. I can spray directly from the container, no mixing or diluting necessary. A lite sanding between coats and I have a smooth finish ready for buffing to a mirror finish after curing for three or four days. I've tried many other top coats over the past 30 years, but nothing matches CrystaLac's ease of use, water cleanup, and durable finish.
Gives a beautiful finish!
from Boynton Beach, FL
Used to finish a hall table. Gives a smooth, high gloss finish. I might try the grain filler next time as some grain shows through this finish.
Great Product no question about it !!!
from La Crosse,WI
You really need to use the conditioner and the viscosity reducer after the 2 first coat described in the directions, as it has the tendency to fisheye. Otherwise really satisfy with the results. Will probably switch to this product for all my productions.