Most screw caps are designed for use with Phillips screws, then adapted for use with square drive. That’s fine, except that they just don’t stay in the recess. Designed specifically for Square Drive Screws, these have an oversized solid center plug so that it compresses when pushed into the recess, gripping the walls of the recess and resisting removal. Common hollow plug designs conform so easily to the basic recess shape that they easily pop out when bumped or jostled. Fits flat head screws with #2 Square recess (#8/#10’s). Caps are approximately 1/2 inch diameter and 1/16" in height. CAP-10170C is a pack of 100.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
Does not cover all the screw head
About Me Professional
Comments about Gray #8/10 Screw Caps:
It does NOT cover ALL of the screw head and the metal showed around the perimeter of the cover making it useless for me. I had to remove the caps and paint the screw heads afterall.
Bottom Line No, I would not recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review