Cut as straight as a panel saw with the versatility of a portable saw. The Festool TS75 EQ plunge saw has a multitude of uses, from fine carpentry to cutting spiral staircase steps; from rough timber to cutting out window frames in renovation work. The TS75 is a larger saw with greater cut depth than the Festool TS 75 EQ.

Portable circular saws often react unexpectedly. They wander offline and are subject to play in the guide. It's a quick way to ruin expensive material. But not the TS75 EQ and included guide rail: the saw blade makes its cut absolutely straight and splinter-free. Perpendicular or even beveled, the choice is yours. As a plunge saw, it can start and end a cut accurately anywhere on the material.

Equally important, on the TS55 and TS75, the saw blade and riving knife retracts into the housing, unlike on conventional pendulum-cover saws, where the cover retracts instead of the blade. This automatically means greater intrinsic safety.

Saw like a professional. Try it once and you'll never look back. Remember, Festool offers a 30-day Money Back Guarantee of if you are not satisified with your purchase.

	If you want to connect guide rails, you will need two connectors.
	Many folks opt for the guide rail accessory kit. The kit will contain two connectors, an extra guide rail stop, a deflector for the end of guide rail (keeps hose and cord tracking), replacement splinter guard, and angle unit and two clamps all in a Systainer-5. The angle unit is the deal breaker: if you do not have a use for that, just buy the separate parts you need.
	We recommend purchasing two screw type clamps or quick clamps. These clamps fit into the bottom channel of the guide rail and do not interfere with the travel of the saw.
	For the Festool TS 75, we recommend purchasing a 3,000 mm (118") guide rail for ripping 8 ft. sheets. The larger 15" base of the TS 75 reguires a longer rail to provide extra support for starting the cut. Two 1400 mm (55") connected to form a 110" will work, but you will have to plunge into your workpiece.

1. Guide Rail of choice (75" guide rail 491503 is recommended by Festool)
2. 1 Universal 36-Tooth Carbide Blade (495380)
3. Limit Stop (485827)
4. Plastic splinterguard (pack of 5 available as 491473)
5. Plug-It Power Cord
6. In Systainer 5 (Festool Case, 497567)

	TS 55 EQ	TS 75 EQ
Power Consumption	1,200 Watts	1,600 Watts
Saw Blade Speed	2,000 - 5,000 RPM	1,350 - 3,550 RPM
Saw Blade Diameter	6-1/4" (160 mm)	8-1/4" (210 mm)
Bevel Cuts	Up to 45 Degrees	Up to 45 Degrees
Cutting Depth on Guide Rail	1-15/16" (50 mm) Straight Down 1-7/16" (37 mm) at 45 Degrees	2-3/4" (70 mm) Straight Down 2-1/8" (55 mm) at 45 Degrees
Cutting Depth Without Guide Rail	2-1/8" (55 mm) Straight Down	2-15/16" (75 mm) Straight Down
Arbor Size	.787" (20 mm)	1.101" (30 mm)
Weight	9.92 lb.	13.6 lb.

Rotating dust extractor connector. 360º degree rotation makes it exceptionally easy to adjust the dust extractor to suit your working position.	FastFix saw blade changing system. The saw blade can now be changed in just a few moves. The allen key is stowed on-board so everything you need is at your fingertips. This new system is quick, safe and easy to use.
Triple motor bearing. The triple bearing of the motor improves running smoothness and extends the service life.	Exact depth setting. Allows the cutting depth to be set quickly. The easy-to-read scale allows settings to be accurate to 1mm.
Zero-play guidance. Once the saw is on the guide rail, no tools are required to adjust the jaws for accurate, zero-play guidance.	Splinter guard on both sides. The attachable splinter guard and the guide rail make splinter-free cuts on both sides of the blade. This eliminates the need for time-consuming finishing work.
Slip clutch. With the TS 75, if the saw blade jams, the sliding clutch prevents saw kickback, thereby increasing safety.	Spring-loaded riving knife. Minimizes hazardous dust for a safer work environment. Also helps you keep a clear view of the work piece and save time on cleaning up.
Easy-to-reach limit stop. Always within reach, the limit stop prevents the saw from jolting back when plunged into the material.

View 'Festool TS 75 EQ Plunge Saw with T-Loc Systainer' in our 2013 Master Catalog (M3D1), page 50