Back to Normal View
Cleaning your shop can be a pain unless you
have an air gun to get into tight spaces and behind
all your equipment. The GuardAir Coandaire air
gun has a small, cast-aluminum pistol-grip-style nozzle to get into those tight spaces with a controlled air flow. The knurled brass nut allows you to dial in just the right amount of air pressure.
Use the long nosed 12" and 24" extension guns when you need to get behind equipment.
The Venturi nozzle increases velocity and air volume by 250%. Side ports release pressure
if the tip is blocked, limiting static pressure to 30 psi which
makes these guns compliant with OSHA standards. A 3/8" ID
hose and coupling are recommended for best performance.
All three air guns have a 1/4" NPT female inlet and an
operating maximum of 150 psi. Made in USA.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
right tool for the right job
By Helpinghands handyman
from Farmington, Utah
About Me Avid Do-It-Yourselfer
Comments about GuardAir Coandaire Air Gun:
I use this air gun to get down into my saws and blow out the dust that is in those hard to reach places, especially in the gears.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review