Back to Normal View
Pocket Hole Joinery: What You Need to
Pocket hole joinery is popular because it is a fast, strong, easily adaptable, precise method of assembly. Joints are as strong as mortise & tenon joints and can be made in a fraction of the time. Award-Winning Kreg Jigs use a 3/8” counterbore bit with an 11/64” pilot to drill a 15° angle into the first piece.With the joint tightly clamped, a special self-drilling “pocket hole” screw is placed in the pocket and driven tight to complete the joint.
Pocket Hole screws feature an auger point to prevent raising a chip between the two parts during assembly, ensuring a tight joint. A large pan head with a #2 Square Recess and extended unthreaded shank enable this screw to draw the two members of the joint tight.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
Good quality [...]
By The Ozark Wood Butcher
Comments about 6 x 1 Pocket Hole Screws, Unplated Steel, Flat Pan Head, Square Drive:
I build custom, fine furniture and antique reproductions and these screws work just fine.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review