Account Management Tools Wish List Management 0 Items : $0.00
Search: 
Friday, July 30th, 2010 McFeely's is VeriSign verified HACKER SAFE certified sites prevent over 99.9% of hacker crime.

McFeely's will not share or sell your email address. Read our
Privacy Policy.

» Screws by Application » RTA Furniture & Cabinet Screws » Pocket Hole Screws » McFeely's Pocket Hole Screws (Pan Head) » Fine Thread Pocket Hole Screws

#6 x 1 Pocket Hole Screws Fine Thread Dry Lube

0610-PTF

Item No: 0610-PTF
Class: PTF
Size: #6
Length: 1"
Bit Size: #2
Bit Recess: Square
Thread Type: Tapping
Plating: Unplated
 
 

Product Information

  Write a Review
Need bits to go with this fastener?

Need to order multiple sizes or lengths of this fastener?

Specially designed for Pocket Hole Cabinet Construction (aka face frame), these screws have combined the toughness of our pan head screws. A self tapping auger point prevents the screw from forcing the rail and stile apart as it advances from part to part. A standard screw point can raise a chip between the parts, resulting in a gaping, unprofessional joint. The screw shank is only threaded for the first 5/8 to further reduce the possibility of cross-threading. Our Deep thread version provides maximum holding power in soft woods like Pine or Poplar where the wood fibers may crumble between fine threads. You normally can’t see these screws as they are installed so it can be hard to gauge their progress. Use a clutch equipped drill and avoid disaster! Made in China/Taiwan. #2 Square Recess. Unthreaded Length 7/16"

Pocket Hole Joinery: What You Need to
Pocket hole joinery is popular because it is a fast, strong, easily adaptable, precise method of assembly. Joints are as strong as mortise & tenon joints and can be made in a fraction of the time. Award-Winning Kreg Jigs use a 3/8” counterbore bit with an 11/64” pilot to drill a 15° angle into the first piece.With the joint tightly clamped, a special self-drilling “pocket hole” screw is placed in the pocket and driven tight to complete the joint.
Pocket Hole screws feature an auger point to prevent raising a chip between the two parts during assembly, ensuring a tight joint. A large pan head with a #2 Square Recess and extended unthreaded shank enable this screw to draw the two members of the joint tight.


Material Thickness Use Screw Length
1/2”, 5/8” 1”
3/4” 1-1/4”
7/8” to 1-1/8” 1-1/2”
1-1/4” to 1-3/8” 2”
1-1/2” up 2-5/8”

Thread Type Material
Fine “Hard” woods: Cherry, Maple, Oak, Walnut
Coarse “Soft” woods: Pine,Fir, Poplar, Cedar; Manmades: MDF, OSB, Particle Board





View '#6 x 1 Pocket Hole Screws Fine Thread Dry Lube' in our 2010 Spring Catalog (MXD1), page 18

Tech Links
& Resources