Back to Normal View
Truss Head Square Drive screws are flat under the head to provide maximum bearing area and have a lower profile than pan heads. Use them when you don’t want the screw head to sink into the wood.#6 Truss Heads use deep threads Clear Zinc Plating. Made in USA /Canada/Taiwan. #2 Combo Recess.
(based on 7 reviews)
of respondents would recommend this to a friend.
Reviewed by 7 customers
Displaying reviews 1-5
Back to top
Previous | Next »
from Plano, Texas
About Me Avid Do-It-Yourselfer
See all my reviews
Comments about 6 x 1/2 Wood Screws, Zinc Plated Steel, Truss Head, Combo Drive:
Used these screws to mount Grass 350mm full extension drawer slides. Square drive a must for tight spaces.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Terrific for mounting drawer hardware
By Sunny 1
from Cookeville, Tennessee
Installing drawer guides is awkward at best, but when the phillips screws that come with the hardware fall off the bit it borders on impossible. The square drive solves that.
Service and delivery comments:
Your $1 delivery (quick!) has me convinced that driving to the local lumber yard or hardware store is a terrible waste of time and gasoline.
EASY TO USE BECAUSE OF TRUSS HEAD AND SHARPNESS OF SCREWS
Just what I needed!
from Austin, TX.
About Me Professional
I could not find these at any of the hardware stores in my town... I needed them to attach the blumotion locking devices to the bottom of drawerboxes, they were perfect. They also worked very well for attaching mounting brackets to cabinet deck.
from Hendersonville, NC
These screws are fine. It would be better if McFeelys carried the number 8 size (in 1/2 inch) in addition to the #6. The manufacturer of the drawer slides I'm using recommends a #8. The #6 will work, but you can see where a #8 would be a better choice.