Our Pocket Hole Sample-Sized Pack includes 25 screws in each of the sizes listed below.
Specially designed for Pocket Hole Cabinet Construction (aka face frame), these screws have combined the toughness of our pan head screws. A self-tapping auger point prevents the screw from forcing the rail and stile apart as it advances from part to part. A standard screw point can raise a chip between the parts, resulting in a gaping, unprofessional joint. The screw shank is only threaded for the first 5/8 to further reduce the possibility of cross-threading. Our deep thread version provides maximum holding power in soft woods like Pine or Poplar where the wood fibers may crumble between fine threads. You normally can’t see these screws as they are installed so it can be hard to gauge their progress. Use a clutch equipped drill and avoid disaster!
Made in USA /Canada/Taiwan. #2 Square Recess.
|Each Pocket Hole Sample Pack Contains (25 each):Screws|
|0610-PTC||#6 x 1" Coarse Thread Pocket Hole Dry Lube Screws|
|0612-PTF||#6 x 1-1/4" Fine Thread Pocket Hole Dry Lube Screws|
|0612-PTC||#6 x 1-1/4" Coarse Thread Pocket Hole Dry Lube Screws|
|0614-PTF||#6 x 1-1/2" Fine Thread Pocket Hole Dry Lube Screws|
|0614-PTC||#6 x 1-1/2" Coarse Thread Pocket Hole Dry Lube Screws|
|0812-SPR||#8 x 1-1/4" Super 8 Pocket Hole Dry Lube Screws|
|0814-SPR||#8 x 1-1/2" Super 8 Pocket Hole Dry Lube Screws|
|1025-PML||#10 x 2-5/8" PocketMax Unplated Dry Lube Screws|
|HX-0230||(1) #2 x 3" Square Driver Bit Ball Detent|
|DRIVER BIT TYPE||Assorted|
|FASTENER BRAND d||No|
|PRODUCT GROUP||SCREWS & FASTENERS|
|SUB-CATEGORY||Other Assortments, Pocket Hole|
|POINT TYPE||Standard Wood|
|CASE / BINS||No|
|USED FOR d||No|