
Building decks of manmade materials like Trex® or tropical hardwoods like Pau Lope® or Ipe? Use award-winning Eb-Ty hidden deck fasteners to hold down deck boards and you'll see nary a screw or nail. Our Eb-Tys now include stainless steel screws with black painted heads, so the hidden deck fastener is really almost perfectly hidden!

Installation is easy - everything takes place on the top-side. First, use a biscuit joiner to cut slots in each deck board where it crosses a joist. Then, apply a thin bead of construction adhesive to the top of the joists. Next, drive a #7 x 2-1/4" long stainless steel trim head screw through the Eb-Ty clip and decking board and into the joist at a 45 degree angle (there isn't any need to measure, the clips automatically set the angle). Eb-Ty hidden deck fasteners' unique design locks everything together like the tongue and groove of a hardwood floor. (Download Eb-Ty Installation Instructions)
Original Eb-Ty hidden deck fasteners work best with dimensionally stable decking materials such as tropical hardwoods from 3/4" to 5/4" thick. Eb-Ty "Live Cylinder" fasteners provide 1/4" spacing to accommodate the seasonal expansion and contraction of composite materials such as Trex® or standard pressure treated materials. Finally, Eb-Ty “BIG” fasteners are designed for use with 2 x 4’s and 2 x 6’s, so they're 5/8" tall and provide a 1/4" gap between boards, and penetrate deeper into the decking to provide for the inevitable shrinking and swelling of pressure treated decking.
Eb-Ty hidden deck fasteners received the 1998 Construction Innovation Award from the editors of The Journal of Light Construction, have been reviewed in a number of national publications, including Fine Homebuilding (March 1998), and appeared on The Learning Channel show “Men in Tool Belts”. Made in the USA of UV resistant polypropylene.
Original and Live Cylinder EB-Ty hidden deck fasteners are 1/2" high.
Mini Jr. and Live Cylinder Jr. Eb-Ty hidden deck fasteners are 13/32" high.
Eb-Ty "BIG" fasteners are 5/8" high.
| Eb-Ty Hidden Deck Fastener Selector! |
| Material |
Material Size |
Gap |
Use Eb-Ty |
| Pressure Treated |
2x4, 2x6 |
1/4” |
BIG Cylinder |
| Pressure Treated |
3/4” to 5/4” |
3/32” |
Original |
| Composite Lumber |
2x4, 2x6 |
1/4” |
Original LC |
| Composite Lumber |
3/4” to 5/4” |
1/4” |
Original LC |
| Ipe, Pau Lope®, etc. |
3/4” to 5/4” |
3/32” |
Original |
| Ipe, Pau Lope®, etc. |
11/16” to 3/4” |
3/32” |
Original Short |
| KD Cedar, Redwood, Teak |
3/4” to 5/4” |
3/32” |
Original |
| KD Mahogany |
11/16” to 3/4” |
1/4” |
LC Short |
| TimberTech®, Rhino Deck®, Trex®, Oasis™ |
1/4” |
Original LC |
| CorrectDeckClassic™, WeatherBest®, Epoch® |
3/32” |
Original |
Eb-Ty Hidden Deck Fastener Usage Calculator
To determine the number of Eb-Ty’s required, just calculate the size of your deck in square feet, then use this table. |
| Decking |
16” Centers |
24” Centers |
| 3-1/2” Boards |
275 / 100 sq ft |
200 / 100 sq ft |
| 5-1/2” Boards |
175 / 100 sq ft |
100 / 100 sq ft |
| Each Eb-Ty fastener uses 1 #7 x 2-1/4” screw |