Festool TS55EQ Plunge Saw with T-Loc Systainer
Choice of Guide-Rail Size
The Festool TS55REQ is so precise you can compare its cuts to the cuts you would get off a high-end table saw but still have the portability to take to your next remodeling job. With a new splinter guard, you can be sure of splinter-free cuts on both sides of the blade. A redesigned spring-loaded riving knife lets you easily position the tool in an existing cut line. A simple detent override increases the bevel cut from −1º to 47º, with positive stops at 0º and 45º. You also have an integrated micro-adjust depth control and easy-to-read dual depth scale (yes Imperial as well as Metric).
The TS55REQ offers great features. The Thumb Interlock makes it easier to switch on the power and pivot the blade down for cutting while the blade lock disconnects the power switch and locks the blade down in position for removal.
When used with the Festool Guide rail system the saws is ideal for installation of laminate flooring systems and allow cutting just 3/8" off a wall. The guide rail allows for fast, precise cuts with little or no setup time since the edge guide automatically aligns to the cut line. Electronic variable-speed control automatically maintains a constant blade speed under load, and the soft start and automatic idle cut down on operator fatigue and noise.
The TS55REQ includes:
- a 48-tooth blade (495377)
- guide rail
- splinter guard
- limit stop
- Plug-It cord
- SYS-4 T-Loc Systainer.
|POWER TOOL CATEGORY d||Saws|
|POWER TOOL SUB-CATEGORY d||Saw, Track|
|POWER TOOL BRAND d||Festool|
|POWER SOURCE||Corded - 120V|
|MAX BLADE DIAMETER||160mm (6-1/4")|
|DEGREE d||-1 deg to 47 deg.|
|MAX. CAP. d||50mm (1-15/16") at 0 deg.; 37mm (1-7/16") at 45 deg on the rail|
|AMPS d||10 at 120v|
|WEIGHT d||4.5 kg (9.92 lb)|