If you often break Pocket Hole Screws, solve your problems once and for all with these #8 Self-Drilling Pan head screws we specially designed for pocket hole construction. For years we've offered coarse-thread pocket hole screws for use in softwoods, and fine-thread pocket hole screws for use in hardwoods. Now you can use the same screw for both hardwoods and softwoods - the Super Eight pocket Hole screw! Significantly stronger than #6 fine thread screws with deep threads for super holding power. Made in China/Taiwan. #2 Square Recess. Unthreaded Length 3/4"
Pocket Hole Joinery: What You Need to
Pocket hole joinery is popular because it is a fast, strong, easily adaptable, precise method of assembly. Joints are as strong as mortise & tenon joints and can be made in a fraction of the time. Award-Winning Kreg Jigs use a 3/8 counterbore bit with an 11/64 pilot to drill a 15° angle into the first piece.With the joint tightly clamped, a special self-drilling pocket hole screw is placed in the pocket and driven tight to complete the joint.
Pocket Hole screws feature an auger point to prevent raising a chip between the two parts during assembly, ensuring a tight joint. A large pan head with a #2 Square Recess and extended unthreaded shank enable this screw to draw the two members of the joint tight.
|Material Thickness||Use Screw Length|
|7/8 to 1-1/8||1-1/2|
|1-1/4 to 1-3/8||2|
|Fine||Hard woods: Cherry, Maple, Oak, Walnut|
|Coarse||Soft woods: Pine,Fir, Poplar, Cedar; Manmades: MDF, OSB, Particle Board|
|DRIVER BIT TYPE||#2|