These tough screws may be used as replacements for gutter spikes, or for new installations. As a replacement, the existing mounting holes may be reused. For new construction, you'll need to use the screw itself and a hammer to tap a clearance hole through the gutter at each screw location. Use a ferrule or block of wood as a backup to avoid crushing the gutter. When the gutter is raised into position, each screw will already be in proper position.
- Our gutter screws have a number 3 square recess, a white painted head to match the gutter, and a galvanized shank to minimize corrosion.
- Two standard packages are available, each including an equal number of gutter screws and gutter ferrules, and one #3 driver bit for an electric or cordless drill.
- These 7" screws are for 5" gutters.
Made in the USA.
|DRIVER BIT TYPE||#2|